Package: block-badips Version: 0.6.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 52 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Filename: all/block-badips_0.6.0-1_all.deb Size: 16132 MD5sum: f8549986d60ad7a82d3d830c3c61f1b9 SHA1: c33710b55a23d1e3da9f53da861702616669e715 SHA256: 43214a23889b0a2b69d49089f3fb8c41b806e8af8f1d6eeac76d86e0e96d28d4 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 3146 MD5sum: a5d87528ee36902a7b98bacb35045701 SHA1: 0110e38a1d36997ff3d1c1e52e20cae9516b9f03 SHA256: ee6168347f95fbfe1a70ee83d4d01dbee5081f047ab0e415fb58cf99488318b1 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: logherald Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 100 Depends: python3 (>= 3.7), python3-yaml, systemd Recommends: go-sendxmpp Suggests: rsyslog Filename: all/logherald_0.1-1_all.deb Size: 26920 MD5sum: acec17cfcdbd8654c3cb8bc82eb7deef SHA1: b67d8f39512f0442b63177203e655393ca60d6ad SHA256: 2ecb50de13a2fc721887d3144b5c4e21a243c20f6064917c06274bf7fa627316 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/logherald Description: Filtered log messages by mail and XMPP, as digests and in batches Selects log messages by severity and by include and exclude rules on host, program, facility, message and systemd unit, and sends them by mail and XMPP (go-sendxmpp). "logherald digest" sends a digest of a time span from the systemd journal and the files rsyslog writes, with messages in both counted once; a systemd timer runs it every hour, not enabled by default. "logherald stream" reads the messages rsyslog's omprog writes to its stdin and sends them in batches, after a number of messages or seconds; an example rsyslog configuration is included but not activated. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3610 MD5sum: f783449823d7f054218f75a53fd9471d SHA1: b99c5e7088d13a30c13f87462a189aa17a5be425 SHA256: f46c62477f5011bedd3a7b57ba25bd62599fa83878c8a906931d1998701661db Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231240 MD5sum: 69473e4ade4c8df7449a004dfc5486c0 SHA1: fee48c7965d56fed53b23272824b59f6b5030493 SHA256: 52a2c90e3a982654d54f4e6342298780dc79aed27b22306213da0247dcf2e41e Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14650 MD5sum: b6bcd97f5ca8a210dd548f76a11b223e SHA1: 3ead4912fff61c0feac40842e13ca974adc1c673 SHA256: 98d4ebb51def9ea00d83d6ed429e557ed1c5762586778913802e15a304287b9b Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14972 MD5sum: 99e3f9e0afae1f634bed9d9c3e2d7828 SHA1: 1a81bd1d4822a3d6a096ded16f371df110cc98f9 SHA256: 42a4ef06a2816cf4feb6a5430e54b4777ea1b370afd67aedb5dfbdf0418b6ded Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.6.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: sudo, bash, grep, ipset, iptables Filename: all/monitoring-plugins-block-badips_0.6.0-1_all.deb Size: 4776 MD5sum: b9e307ebeccd59ddb23a13491bfc18fb SHA1: 6e9aeae0a72b7b2784debb771f3960ff15747e14 SHA256: 96b33c2eb109fe0187bc70ac92566072082f5380b877f0530b5cf6d376f900e4 Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3282 MD5sum: a4a6cb9af2b0bc6c5138af05ede7542e SHA1: a0527645f745da1b8b54ffee8fff88b7b77e615d SHA256: d41e0d361b6b374e30aa3685216d32cbe2dc4b4cb120beb0f786df9987711b5f Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4484 MD5sum: 14f4926bf6af5e20636766228ad3c199 SHA1: f15e628c53c43d679663eefbc3af55681368232c SHA256: a8d595b7e86d4697b8826fb47c73cd8c0d68594062d3a921f6d5f354d6531d30 Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 13 Depends: openssh-client Filename: all/monitoring-plugins-dd-wrt-inet-access_0.1-1_all.deb Size: 2336 MD5sum: b70249a7e626eca077c1e366cd52a04f SHA1: a43fab479370b4b6b90bca0f0425a2bb2f2daaa8 SHA256: 11be1c6b371061e0512b1b21f0fbd7986c2a469e234abcb76e11e0b31da1eb53 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 14 Depends: openssh-client Filename: all/monitoring-plugins-dd-wrt-ps_0.1-1_all.deb Size: 2754 MD5sum: 653846c8cc941f1e8f9e3eb0df419d43 SHA1: 0c80101197d0106b66bbb76ce460850afc1553f3 SHA256: 6f7b73bcbe21951929415224aa4ef4c0ce6dd20aeb9d6e2d2372fa08f592490b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9578 MD5sum: 8f9098ee50c2812effff11011ee903ab SHA1: d59fa2c2206ea26a1865b9f1d8c7d823340103a7 SHA256: 9ce6bb43c9d2300bf30e2bba1ef416e0ba1abfe6d35cdcf56c14c21005fa04a2 Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Filename: all/monitoring-plugins-esphome-sensor_0.2.1-1_all.deb Size: 14678 MD5sum: 5d951b8ec4b4161e065ff00f24baa7c7 SHA1: 91a6f712bebf4451d99c7db236efdbe1468497d2 SHA256: 474cd706b539eb13154e8d373e303f100016575f2c476f5a2647b6e2dcb9c98f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: exim4 Filename: all/monitoring-plugins-exim-queue_0-0_all.deb Size: 3104 MD5sum: 5a8530bc747894a8454921243bf23e8c SHA1: 1ceee351767c481499941d48637c3b99079f9be9 SHA256: 9a9412caa5eeee55d9b499a4e035932ff435eba141001bb9eb3ffe309e2dc698 Section: libs Priority: optional Description: Uses exim -bpc to check the length of the queue of exim. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3914 MD5sum: 501ad1c81808bfd7557e70143c4f6f9e SHA1: 7288a54506149c9712b57a32a1a42c5692e8280c SHA256: aec30683c3f7bc7c3cc65c80bca96c42eb1111f42b3d546a53dd42c5ec197d04 Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2986 MD5sum: 88fe460bf1264ae8fe6aad24d5c0d67f SHA1: 1b52877458bae938639da9e6ec406f5a90e16a34 SHA256: 0c7dff2b275ae907ec03e90ac4046a922ab1932cd6f1135ee9826569174adc7f Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 4066 MD5sum: 0d5dda3b18daf790367611c096018b21 SHA1: 8ad087cd07fdf414e30b15f7bb35e2044afa0c6d SHA256: 64be8d1a8db7b62522f941f72a4ba3c6344a51c5e14e774858c7d38998564395 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7) Recommends: openssh-client Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.2-1_all.deb Size: 9558 MD5sum: 4ab7b0729cae75d8362c96c4613d6f60 SHA1: 3e8e73a31e757582e15be722a3fb7329d407bf69 SHA256: b5652e664f7d13909bf6cbd01134199f8e08ade6e47baeb0c678f3649eb0defd Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4916 MD5sum: ab4fa2bf5c327049121cdde0b403cb11 SHA1: beb6500618bd2d4a678fee61bdb4cb40d418a388 SHA256: 783ff0097604fb0626a3d9b4227f5b6f62200c2c62ccead2b195950413825380 Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3656 MD5sum: f2430c0b72b814c6a7feece3f355357d SHA1: 6f72a138bb95f2e3553f2a80ecf8d16dc5323734 SHA256: 6dc1d3aabf0af804a4a9c86d27b87e63fe7b090e1cab572627e9be325577ced0 Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 34 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-gitlab_0.2-1_all.deb Size: 10868 MD5sum: 6aa7b66626a9510e8cdf89bf2a794139 SHA1: f859de61c8ada3488afe396a359775fbf2170ba5 SHA256: 6fa2b9a80e3833fb36760a26eadd83de5f48908fb26f1e189331f1ba6c3acaf3 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4302 MD5sum: afa211192ce5fa190c8dbdb6e10be3c6 SHA1: 07f86521f875647224c59d8f54cb4f10b9e9bba4 SHA256: 5c9cf98350f80fab8deded66ca6be271c5d698f0585d01c7e2d1480ebeb85749 Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.1.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8) Filename: all/monitoring-plugins-homeassistant-sensor_0.1.0-1_all.deb Size: 12512 MD5sum: d8498ab1ec4fb301d9b92d0dd818915e SHA1: d56fe65f8eac73f59764c51e440427a1e02b9534 SHA256: 30d1bd13eb7a2c3f9bead82451be625ce08670283e53b6d4958879b55ebc2a7a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.3-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-immich_0.3-2_all.deb Size: 9322 MD5sum: 6eace2d46f0234acbb42b810c77e3068 SHA1: 9a3ac844bfb7330a627b076e0d11dcb632cb5421 SHA256: 93c1c70c60a29985ee30451bbffc543423f6ddaee8ae70444f83264f1ec28068 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb-data-age Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 30 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-influxdb-data-age_0.1-1_all.deb Size: 9452 MD5sum: f9b440201caa7b86622ca08f1c5ad7b3 SHA1: 717a98830ebaa86fe03893a50ea891bbb7369c38 SHA256: 49c2d310e64a52ac48a21b56622957649f186483b731d5790838f260abfeadfc Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3532 MD5sum: 7822a7bca8a74ce15185e37b868c1454 SHA1: 0c09e09549dea7c8902789478e1d124ef1a0eda1 SHA256: 2c85a0450c0e8280e41b496ae9f690733f9a952e8c81334f9b0542f2bd0e5d29 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28044 MD5sum: b428844b63df6bc69f88734363b63b25 SHA1: 672fc5723b7dc6bf60397712cc95cb78dea16bdb SHA256: b4d7ac25f3d69af1aa4c47d6bffcd736bd53d3e920eded6716609eb1e35d4e4b Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.1.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 58 Depends: python3 (>= 3.8) Filename: all/monitoring-plugins-isg-wpm-sensor_0.1.0-1_all.deb Size: 16826 MD5sum: 1a39cc1c99b9964091cc6ac4344b60b3 SHA1: cbc47cf169002bfa7d5b2bdbe25956a8b46a1cfa SHA256: 7f03de77f6a8291f7f95918e2544e39de76ca51665c08054d989152334751589 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 5134 MD5sum: 80ed82580aba3c71797be83bdff637d7 SHA1: a086e351ffc6e5d5d7ad20578c8cf48ca7b9461b SHA256: 81e96f832a45c7e948724683bdd9d736a62c9f4c0667a4f7b56113355f09f7b5 Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3944 MD5sum: 7b0bd9d4a5c9b7e64066a530f9b63f52 SHA1: 8085fae26580534caef84232e7b8a9ed7e07f419 SHA256: ce5c89685263182fa893bacaf0e167dde9e331055110688281e24a6454d1c38b Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 8044 MD5sum: a56f716d24a79544d975cad164d1b581 SHA1: bc1cb37fc319abade2a368dd433fc857bcf5f973 SHA256: b5692e118f7ac40727db4aba038905bbb0e81d9ce2f7409e62bcae27bbfe72ca Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3438 MD5sum: e354f02827cd492a428b8c554fc8df9e SHA1: 633acf4a289f4bf3cef16b35ef639b4109a8222c SHA256: 475b9005e618cfa5a0b76509767f5aaa7c5d2158464d21e344d7eed61774ce86 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-mqtt-topic-age Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 82 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3-paho-mqtt, python3:any Filename: all/monitoring-plugins-mqtt-topic-age_0.1-1_all.deb Size: 19278 MD5sum: 6a7b6429a91b2a2d4914961c89658c84 SHA1: a4be12636bf546ca3324c1298430aa64ce3806db SHA256: f7c97af932ea73805af8815f93130887c064d8475c85ed567f080becf7a8d19a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_mqtt_topic_age Description: Nagios/Icinga plugin to check when messages last arrived on MQTT topics Checks when messages last arrived on MQTT topics, or how many arrived recently. mqtt_message_timestamp_logger, a daemon that runs as a systemd service, subscribes to the topics and records the arrival times in an SQLite database, which check_mqtt_topic_age reads; so the check needs no connection to the broker and cannot miss a message published between two checks. . Topic filters may use the MQTT wildcards, and every topic is checked on its own, so one live sensor cannot hide a dead one. Package: monitoring-plugins-nextcloud Version: 0.3-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-nextcloud_0.3-2_all.deb Size: 11050 MD5sum: 72f693a8a3f5e704ff6781e1028b3b19 SHA1: ab19a998edcf1071e8cabd9dad30c7210a532ec9 SHA256: a76cd9e8e66003040cfcd726f113d54cf560a6e2e2fb37da372a44cdcb422333 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5896 MD5sum: b9d925d94a68caf11d51f3dbfb15617c SHA1: b97036c209226ae5c49a1225c9e36807d619cd42 SHA256: d0e57b268d9a059176c72f19af08a4e98e6011d2bafef7ac517833cfa765e55e Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-ntrip-caster_0.1-1_all.deb Size: 9348 MD5sum: b359c6d6dee7db8e630b053b0fe938ec SHA1: e0b23adf0ca9af30385776f3fa80b997af659d56 SHA256: ff3bd58abbd18b8cdd94715489c00c65a54783dd0de888d32cad44c7c0ba0a3d Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-nvidia-smi-temperature_0.1-1_all.deb Size: 3452 MD5sum: 64574f67716f83bc0ff37e0334bfc6f6 SHA1: 62f7a6fa93ba062f934354fa595165136ed770ca SHA256: a5ea90823bb5cce5561c2cbef93a1a779f130e692c440964abd4a321c4d3d061 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5444 MD5sum: 625ee6c98bae98e6312fa52bee4481e2 SHA1: db5abafca41804e5e454b6e640966e1b4261f10e SHA256: 5311f0a436a303d80e01cf826ac50582479cbd878391f78df8b53719893a0f64 Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-part-db Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 58 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-part-db_0.2-1_all.deb Size: 18348 MD5sum: 5473698d3a8e7bc3675e179b003285a2 SHA1: bff0a95db2483209a758c46cca2701833b538470 SHA256: d9f823e3c8137e35dce4dee032a9d2a874bfd9f74f9d290b13468d27350f8060 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: python3 (>= 3.7), sudo Recommends: podman Filename: all/monitoring-plugins-podman_0.1-1_all.deb Size: 8530 MD5sum: 20c94e7f619f1bf7724c53a77b4cc4f0 SHA1: 8b71e0ea55c00559d7720e9e1a2cd2d7a8724337 SHA256: 8eb19c6d9d64f0da56d879e8812421bc882c5a8fa61830ec22bf2e6454da6013 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3510 MD5sum: fbd54a8589ba27337c1ac65bdb2f6773 SHA1: e537033e543b999f7aa748e8adef838a3c09c5b6 SHA256: 37f28a1bf547f676d090b39e3137ba19cb64dc825ba0e5bc4a187825f2e5c7ee Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-printer-php Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 40 Depends: php-cli, php-snmp Filename: all/monitoring-plugins-printer-php_0-0_all.deb Size: 7680 MD5sum: e545eeefe9b22c16de550c756eb15794 SHA1: a9cda5df4761a1e9417635eb62f4ac108eddb06c SHA256: 2177cdd5742e5bb8f2a1710425d23c7fbc4c7c84b5f214c24307d9b59c9d9ef1 Section: libs Priority: optional Description: Advanced printer check supporting multiple vendors (HP, Kyocera, Ricoh, Nec, Lexmark, NRG) via SNMP. Reads paper tray status, toner/ink levels, hardware part status, internal page counters and alert status. Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4484 MD5sum: 81a9b91ef1d47c1bdca1403d26071394 SHA1: 92d21b06816e2a1232c5f8caca7e77d9a8d5e6db SHA256: 72a7f2226e18f0481eecf6e4183417bceb248283a10d96fe37f2f9f0eed7e3a4 Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3812 MD5sum: 5d67c7e7d19c197149f8f430178826ee SHA1: 732c8066e04dc2c49e07a37f0a1d475b83100e2f SHA256: 4a4dffc5d59539339a50f38bde7483c75e7294638e2ba322178c53dddbd49410 Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: bc, openssh-client Filename: all/monitoring-plugins-remote-load_0.1-1_all.deb Size: 3248 MD5sum: 07bbca9e5111c3602c7b9a3bfa477b28 SHA1: 9b8c12f0d995a152541de637e4308f0bbb091779 SHA256: ab8c54fd660ac2e6a1916f74f3e423688564db0450e1d1e76ee2284d3f7e573e Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 28 Depends: python3 (>= 3.7) Recommends: openssh-client Filename: all/monitoring-plugins-reprise-server_0.1-1_all.deb Size: 8868 MD5sum: 37038075ddd85eac7ad3befef183cd3a SHA1: dfa286e11d0089b832473fa3e34ed2a22aded708 SHA256: ff2a1594763ff726a8d0f48cd727478f3a0c9b3e70173c87d70d2b1af61087d0 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: lm-sensors, bash, jq Filename: all/monitoring-plugins-sensor_0-0_all.deb Size: 4708 MD5sum: a2cbf6acec4546919a235eb5638ba0dd SHA1: 3c2761a1aa99892baa3ca4b1dc7ebbe1dd944439 SHA256: ae855066b5d7276fe3473750ea31cf4da752b6c513d399998443fda5b381357c Section: libs Priority: optional Description: Uses sensors package to read hardware information like fan RPMs or temperatures. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3234 MD5sum: c50b1491fc91532d4659ed7b8e9f82c0 SHA1: c6ea3cbae8a999ae55cb55fda529c2a0b52d911f SHA256: ac801296f654220debae257f77dc3b37542c056da5ede2d6afbffd67ae1cb69b Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: snmp Filename: all/monitoring-plugins-snmp-printer-supply_0.2-1_all.deb Size: 4622 MD5sum: ff45f46a5f00cad16caa05c2bd6462bb SHA1: 70b18dfb80cc3742682cb77506e2f4ece6c365f5 SHA256: 78e234baa136ad7e64d30db6238cf0b1d25fccc87e19bb1e517eb1337684e628 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3466 MD5sum: d5bb40d2e5fd01b09c6ec3cb170e0aa2 SHA1: ad2d489da1d788b68eb6202eeeb67d21a7a3fe84 SHA256: 5429402c530eafc3945b29499918195f37e4c75549234b59fee2e53ebdce070d Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49734 MD5sum: ec790ea28e80df4385da6f3880726d6a SHA1: 91f6230b0e8b35d04e7af488a7a656fa9197fec9 SHA256: ba0212372e3fc156317c074600a93b366a6b06b17e7d4728f3571a3217ad02d6 Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-stun-turn Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-stun-turn_0.1-1_all.deb Size: 9740 MD5sum: 1c4022495e18722a53bd096459055728 SHA1: 55a28c270bb15feb0b2291817d4bf6d03fb5fa0a SHA256: e36cc746da656239600227adafb7e846fb6948631881742a558e88f35398ff2f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd Version: 5.0.0-0 Architecture: all Maintainer: Debian Python Team Installed-Size: 83 Depends: python3 (>= 3.9), python3-nagiosplugin, systemd, default-dbus-system-bus | dbus-system-bus Suggests: python3-gi Filename: all/monitoring-plugins-systemd_5.0.0-0_all.deb Size: 18488 MD5sum: d2c413e9af9cb78d1fcc3337d4e8acef SHA1: 12f7ecf9a6b66d7b1249af470b3ee25879a055f3 SHA256: 32092a4b2914d1b819f8fedb22e70a99f32b59c379c0f126de4d7f4bce0e87ae Section: net Priority: optional Homepage: https://github.com/Josef-Friedrich/check_systemd Description: systemd plugin for nagios compatible monitoring systems This systemd check for nagios compatible monitoring systems will report a degraded systemd to your monitoring solution. It can also be used to monitor individual systemd services and timers units. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3418 MD5sum: 43ead320af5f25523fc16e4c5db1cc8a SHA1: d2c86c7227bf805af5fb9dee047c694265abb168 SHA256: 44ff9425c6f50edcf89d4a97f4d69fe6bf400a629d8af441e63e699014726aaa Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: openssh-client, systemd Filename: all/monitoring-plugins-systemd-sh_0.2-1_all.deb Size: 5000 MD5sum: 84d0701924f411434dc9f262a56bd34a SHA1: 4efffeb26e52eb1978312624c3489fcdaac34e87 SHA256: 76126924df62112cb3636b7be28fd442ab8557dad4ed45ffa9579d499dc61676 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.8), python3-requests Filename: all/monitoring-plugins-tasmota-sensor_0.2.1-1_all.deb Size: 11360 MD5sum: b04b9b3853858b4e8b7617f53d99d4cf SHA1: 923b770548cf476116e8a500cbb411a62f641daf SHA256: 9e833a113c34cfc06c32297be55a0356fa655cd3622bfe609409f8f022674fe4 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: tftp Filename: all/monitoring-plugins-tftp_0-0_all.deb Size: 3304 MD5sum: 25ee926e41d3560a57c87ee6bbe93af3 SHA1: 65c35b36d3c25b483cfe3f9c5b20d6fcf2e6bdc0 SHA256: 10bfb0aa1ed9477954fe5905b7837334d1e1ad3fc5b6a995abda91f48c4e1400 Section: libs Priority: optional Description: Uses tftp to connect to a tftpd and checks if a file with a known name can be downloaded. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3452 MD5sum: 7abe53f089eed5d626e79b73bf0dc520 SHA1: 84037ab9214b0608a00443ea26d9c74ba5641990 SHA256: ef803ed3a0d4a19c154e4af1e6d8732cb70d44ca712410afd5ec68380ce141b4 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: curl | wget Filename: all/monitoring-plugins-tor-proxy_0.2-1_all.deb Size: 5744 MD5sum: 6c0596e73707e196d96fc9a41f41986c SHA1: 96f92f7046613a160d73e6d5b1910f7195779839 SHA256: 8e725586382bfdb87f2609c992500fd3157d9ba540414b5637eae569662bed1b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3452 MD5sum: 91f117b8aee94457080dbf967a0fe3d8 SHA1: daa8ef0d7fad498ef8a7cc9cfaf178c0ba7c9c4a SHA256: 599fa7ec2294bec7171f130b659b60c9a06363a326c1fd14a67367f059b3634e Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3828 MD5sum: a9de9b2fdb66ce4dcb3392591c5ee067 SHA1: 7246e6cc16ddb84ae0a8d73bb71bdd3fbc90103b SHA256: e5a2c556b05e27b3d96c59250532af63ba0872bf3a8c58003cbb62fcbd80d30f Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 4058 MD5sum: c91b0938e7e88c182da8856cbda8ad96 SHA1: 3a8c3fba0021149e693de48b9669309e7df00e7c SHA256: 124a8a0c9fdc665aed471302efdf1fd15a7ec7f047eca48374548f0bcdb6d4ae Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 52 Depends: snmp, gawk | mawk Recommends: python3 Filename: all/monitoring-plugins-zyxel-hw-monitor_0.1-1_all.deb Size: 7998 MD5sum: f286b2e0acdac7e8d5e7f0a24b3c9b68 SHA1: 4952cf5a936a3b7b58526c2408aad4372f0d17a2 SHA256: c45cc9404b7f972c353c684cb86d0e0145d43134692d995d85028dac77feb159 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 59 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Filename: all/mqtt2logger_0.1-1_all.deb Size: 15046 MD5sum: 186af1107d43a401fb35b643e610a46a SHA1: 792294a6b55938585bf4f456faadc31505d66b18 SHA256: b00a1fd87d93d12e822a4e78fabf167245fa97cd2853e93c445af2718d8ffc97 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Depends: jq (>= 1.6), postfix (>= 3.1) Filename: all/purge-postfix-mails_0.3-1_all.deb Size: 4330 MD5sum: 5df1399921c47d9b254800863b3d6fe3 SHA1: 92c55b1c938c828eba7abb83dfb267f6ff29ca7f SHA256: 160b0ba4f3609518a37302cd75f59722c0d762fc9332c5c41ac82912dccf21e3 Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7102 MD5sum: 099d7f89b24f5485d94f64e299a4b446 SHA1: a53b1af8923bbf144c1c5ba69ef9e2c73b885b13 SHA256: 57d4d702a450c5e545a1c5db33c3144b97c2807fe78fa9fad7e7bc450bc94194 Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vm-boot-order-2 Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Filename: all/vm-boot-order-2_0.2-1_all.deb Size: 10814 MD5sum: 176eecef00c384c110e138e5629e3d65 SHA1: dae2445638bacc052476a614dcf98821538c3edd SHA256: 1e6b0c8d9b834f8518e845c20a211e9ed4df2985ff676850283f80622aed5ace Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.