Package: block-badips Version: 0.6.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 52 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Filename: all/block-badips_0.6.0-1_all.deb Size: 16128 MD5sum: 3f3748e84cc9cceb8f557ff0107011df SHA1: 544e49c8705bc2c4a50fa4ebdd4ee3d96762240b SHA256: ac5f97a88faaf3e0735611b7afddbd4dc2a3541d16ace8621a4ce0e2143867dc Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 3146 MD5sum: 5b94a315634c229f84214760faef2b8e SHA1: 4fc444452c030bf4c0957485669242806bde9a3f SHA256: 2499489bf86f528f7735aad3beaac7d66f4af6bd01d5c719a1ca29ff64bbad17 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: log-digest Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 78 Depends: python3 (>= 3.7), python3-yaml, systemd Recommends: go-sendxmpp Filename: all/log-digest_0.1-1_all.deb Size: 20560 MD5sum: 4b5e1361bfc383db72fdc5954f1b70f8 SHA1: 759be8986b9a31f78d2170c144942bc6a2e0ac80 SHA256: 74d8beaae94cd6e009e5453a94b7d22307c0cdeb66c1b5292269fbbb649dcf1b Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/log_digest Description: Mail and XMPP digests of warnings and errors from the journal and rsyslog Sends a digest of the warnings and errors of a time span from the systemd journal and from the files rsyslog writes, by mail and XMPP (go-sendxmpp). Messages that are in both are counted once. The digest starts with a table of the hosts and programs with the most messages, followed by the messages; with too many, only the table is sent, with high priority. Severity and include and exclude rules are configurable, on the command line or in /etc/log_digest.yaml. A systemd timer runs it every hour and 10 minutes after boot; it is not enabled by default. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3610 MD5sum: 997b386c7cf12b5f3141e17c1e51e216 SHA1: 288e0455c0c64cd8fb69699eb4c422a92d7e7684 SHA256: c072f30dcbf1c6b191b102c24bd736a552925042d2e2ab66fa46580132eb7527 Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231240 MD5sum: 69473e4ade4c8df7449a004dfc5486c0 SHA1: fee48c7965d56fed53b23272824b59f6b5030493 SHA256: 52a2c90e3a982654d54f4e6342298780dc79aed27b22306213da0247dcf2e41e Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14650 MD5sum: b7f46a5bb13c2dc3857859e59bbe3157 SHA1: fa8cbda82b32cbe5faadc65d3c98bcf7c13ebc17 SHA256: 60ceb1db92cfbb7368663918f54c5fdc902c2162404c562a57f8827916735b58 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14972 MD5sum: 99e3f9e0afae1f634bed9d9c3e2d7828 SHA1: 1a81bd1d4822a3d6a096ded16f371df110cc98f9 SHA256: 42a4ef06a2816cf4feb6a5430e54b4777ea1b370afd67aedb5dfbdf0418b6ded Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.6.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: sudo, bash, grep, ipset, iptables Filename: all/monitoring-plugins-block-badips_0.6.0-1_all.deb Size: 4776 MD5sum: b9e307ebeccd59ddb23a13491bfc18fb SHA1: 6e9aeae0a72b7b2784debb771f3960ff15747e14 SHA256: 96b33c2eb109fe0187bc70ac92566072082f5380b877f0530b5cf6d376f900e4 Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3282 MD5sum: 8e4e632f934b2981b31aafe876e76ac3 SHA1: 3e992cc08fa0f92a2de8f2a34457d40afffc0429 SHA256: a10566044fcca0b7f177d1d088d8a4c803df68375ca82690bb3b2b175cc5bb11 Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4484 MD5sum: d681e6984bacb5c386faed06f0ef4e52 SHA1: 70de17e3bd311d531768c5885baabd54549bc641 SHA256: fd170f11d4dd5ab1f7737fba687e0fa331f4db15f93bff8ef81519b669db9b6d Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 13 Depends: openssh-client Filename: all/monitoring-plugins-dd-wrt-inet-access_0.1-1_all.deb Size: 2336 MD5sum: b70249a7e626eca077c1e366cd52a04f SHA1: a43fab479370b4b6b90bca0f0425a2bb2f2daaa8 SHA256: 11be1c6b371061e0512b1b21f0fbd7986c2a469e234abcb76e11e0b31da1eb53 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 14 Depends: openssh-client Filename: all/monitoring-plugins-dd-wrt-ps_0.1-1_all.deb Size: 2754 MD5sum: 653846c8cc941f1e8f9e3eb0df419d43 SHA1: 0c80101197d0106b66bbb76ce460850afc1553f3 SHA256: 6f7b73bcbe21951929415224aa4ef4c0ce6dd20aeb9d6e2d2372fa08f592490b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9578 MD5sum: c4c27f0a8d88e3dc8770398fc1720dc9 SHA1: 94b1f75c782f45af40db98d857290760820f6cc2 SHA256: ba45a512c728621d3f0468b7122e2b02b94f270810a7efa5319b7b75e89defe9 Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Filename: all/monitoring-plugins-esphome-sensor_0.2.1-1_all.deb Size: 14678 MD5sum: 5d951b8ec4b4161e065ff00f24baa7c7 SHA1: 91a6f712bebf4451d99c7db236efdbe1468497d2 SHA256: 474cd706b539eb13154e8d373e303f100016575f2c476f5a2647b6e2dcb9c98f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: exim4 Filename: all/monitoring-plugins-exim-queue_0-0_all.deb Size: 3104 MD5sum: 78f7bbe55d1ac39df51f50667db5d566 SHA1: 70e969d95f4487f1b667f8794403c47346d9b784 SHA256: 4771f068942254c1a1eca78f941d822bca818af362f5f3ce188d1f426a855e54 Section: libs Priority: optional Description: Uses exim -bpc to check the length of the queue of exim. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3916 MD5sum: e2d8c495fd28d3b385020808864b69f8 SHA1: 1075315a3e86ef3d1e2796feb042c35d80082084 SHA256: a4dd13b839956fa07d2d02b38eadb6cd19d74e6ef1ec61d9c0e88a682ebbc07e Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2982 MD5sum: 9ec7b359abb5aaba516856077215818e SHA1: 1d68ec14f462ccfe6685c1db0aeabe7728235d2a SHA256: 313568ec954f908557bf7833e7ad41ee0b1ccc1b5e6381d7ce00f01e2ffab20e Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 4066 MD5sum: c1f101c99a746aa368176d772e124921 SHA1: 0624c830bd0cfe75d4a1c05833c136aa37b8885c SHA256: e5c6e109ed17f537f583f9f0847c2402a04d7156e9e7069ca9d81a77e8ac2e81 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7) Recommends: openssh-client Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.2-1_all.deb Size: 9558 MD5sum: 4ab7b0729cae75d8362c96c4613d6f60 SHA1: 3e8e73a31e757582e15be722a3fb7329d407bf69 SHA256: b5652e664f7d13909bf6cbd01134199f8e08ade6e47baeb0c678f3649eb0defd Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4914 MD5sum: 36d23bb59522c6dc3b4a02e397ee829e SHA1: 0abe2e1859c9deab5a2181a9a2e4075cc8a2ebb5 SHA256: 953e4f12085c3cbd2d70dbee87985269913fbf0fefa3ea833b8c6a4f4b57b62d Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3656 MD5sum: b5f18b2ca3f050b0c357dfe35bbe0dba SHA1: 4fa34f395215afece59e78c4ff276841cc49549a SHA256: 565b46335dfaa74ab7544170f99938cdd1603d69cfabd9b8813acdf63e4361cc Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 34 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-gitlab_0.2-1_all.deb Size: 10868 MD5sum: 6aa7b66626a9510e8cdf89bf2a794139 SHA1: f859de61c8ada3488afe396a359775fbf2170ba5 SHA256: 6fa2b9a80e3833fb36760a26eadd83de5f48908fb26f1e189331f1ba6c3acaf3 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4302 MD5sum: 3b74cfa8bb53adddfeea2a6e997d7caa SHA1: 2c478af942add91c97bc8f89bc8103b37647a612 SHA256: b40b4010f9fd2c76719306e2dc875d54395afd8d6d698068a96a44c2fcf98868 Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.1.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8) Filename: all/monitoring-plugins-homeassistant-sensor_0.1.0-1_all.deb Size: 12512 MD5sum: d8498ab1ec4fb301d9b92d0dd818915e SHA1: d56fe65f8eac73f59764c51e440427a1e02b9534 SHA256: 30d1bd13eb7a2c3f9bead82451be625ce08670283e53b6d4958879b55ebc2a7a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.3-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-immich_0.3-2_all.deb Size: 9322 MD5sum: 6eace2d46f0234acbb42b810c77e3068 SHA1: 9a3ac844bfb7330a627b076e0d11dcb632cb5421 SHA256: 93c1c70c60a29985ee30451bbffc543423f6ddaee8ae70444f83264f1ec28068 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb Version: 0.2.1-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 7904 Depends: libc6 (>= 2.34) Filename: amd64/monitoring-plugins-influxdb_0.2.1-1_amd64.deb Size: 2675928 MD5sum: d15eca4a7c3fc04f831526ff75bffb47 SHA1: 220cf9afc2aacc8639301c6ddef502a220b57a43 SHA256: efd196ed9ef9a7ce122d734edfd9ef8b9483917d8f81a6f4bff3b6481c6b3742 Section: net Priority: optional Homepage: https://github.com/NETWAYS/check_influxdb Description: Nagios/Icinga plugin to check InfluxDB Icinga/Nagios check plugin for InfluxDB written in Go. It can check the health endpoint of an InfluxDB instance and evaluate the result of a Flux query against thresholds. . Both InfluxDB 1.8 (with the /health endpoint) and 2.x are supported. Package: monitoring-plugins-influxdb-data-age Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 30 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-influxdb-data-age_0.1-1_all.deb Size: 9452 MD5sum: f9b440201caa7b86622ca08f1c5ad7b3 SHA1: 717a98830ebaa86fe03893a50ea891bbb7369c38 SHA256: 49c2d310e64a52ac48a21b56622957649f186483b731d5790838f260abfeadfc Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3532 MD5sum: db686e0715e823b4409e3eba03fe26ed SHA1: 056fb1581850852b23480a47fb82c67817b54f1e SHA256: 7bf7c0eb4fe4706392e0fa62aaa6dae7cdbdd66d75ee63d7404e340ad538e3a0 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28044 MD5sum: b428844b63df6bc69f88734363b63b25 SHA1: 672fc5723b7dc6bf60397712cc95cb78dea16bdb SHA256: b4d7ac25f3d69af1aa4c47d6bffcd736bd53d3e920eded6716609eb1e35d4e4b Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.1.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 58 Depends: python3 (>= 3.8) Filename: all/monitoring-plugins-isg-wpm-sensor_0.1.0-1_all.deb Size: 16826 MD5sum: 1e51b4f3afc2830ce30244d8120a6802 SHA1: b1080ac3e5d4cee54e46eed928a6dc7f247328fd SHA256: 041d99db11e1a5c5b6cbb0aa38d19a80d4a00620a49d56b7faa1fbc9c4f6965f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 5136 MD5sum: c0c1d77bb3575bed1368c8c065a56ccb SHA1: 714a6d93bf47966801a1d326629d563a7c40d717 SHA256: 7c7dc0cc12a748a3ac603dc8cbbfa32bc416b5801bacf47a23c22a176b0f96ef Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3944 MD5sum: 1dc9ec917aedcce410e6db5ad451af32 SHA1: 0a221d90ca284ed6691bec84233eec7e0f9fef26 SHA256: 3dfc629fea5f4f196fae40aafc9b7238a579a16d86b166a3be2f9c235d5394c9 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 8042 MD5sum: 71fbe8af68cdccf10e5f7c754e5ef6a7 SHA1: 6a3012d711ad9a81bcdaf5a6a7c464511ec2aba1 SHA256: 42327542e5099777bd0fb503c278bd18d908f2bd5556cc9a432a036053f3309e Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3440 MD5sum: a7a93873131e86afd8dc3ae553418f09 SHA1: 730b435f1412c0ac63691336afa0d142c7f024e6 SHA256: 9bb740c2bb49854939a1527cce5895bd9e591c54647c961a7a390c1ef1d83d40 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-mqtt Version: 5.1+git20260211.003f5cf-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 32 Depends: python3, python3-paho-mqtt (>= 2) Suggests: python3-jsonpath-rw Filename: all/monitoring-plugins-mqtt_5.1+git20260211.003f5cf-1_all.deb Size: 10532 MD5sum: 5504be2eab1156d1943bc34cba2bebc0 SHA1: faf274efd0341254c61d0af1c55186869e0408a6 SHA256: 04c06f0ae94dad4538725d753a21e42719a7d62f95b0509db54942862b2f6ff4 Section: net Priority: optional Homepage: https://github.com/jpmens/check-mqtt Description: Nagios/Icinga plugin to check a value published on a MQTT broker Subscribes to a topic on a MQTT broker, optionally after publishing to it, and checks that the payload arrives in time and matches given criteria: a value compared with an operator, or a Python expression for warning and critical. The round trip time is reported as performance data. Supports TLS, authentication and MQTT 3.1, 3.1.1 and 5. JSON payloads can be queried with a JSONPath expression when jsonpath-rw is installed. Package: monitoring-plugins-mqtt-topic-age Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 82 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3-paho-mqtt, python3:any Filename: all/monitoring-plugins-mqtt-topic-age_0.1-1_all.deb Size: 19272 MD5sum: bd737f4bd384a154727f216b63182a1f SHA1: ff819c5efabbe7f7753e03402acee2aa61493e0c SHA256: 3b49b3ad19b648923837496349ce37800689493b185cf69eeb9dd74c4a14d0c6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_mqtt_topic_age Description: Nagios/Icinga plugin to check when messages last arrived on MQTT topics Checks when messages last arrived on MQTT topics, or how many arrived recently. mqtt_message_timestamp_logger, a daemon that runs as a systemd service, subscribes to the topics and records the arrival times in an SQLite database, which check_mqtt_topic_age reads; so the check needs no connection to the broker and cannot miss a message published between two checks. . Topic filters may use the MQTT wildcards, and every topic is checked on its own, so one live sensor cannot hide a dead one. Package: monitoring-plugins-nextcloud Version: 0.3-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-nextcloud_0.3-2_all.deb Size: 11050 MD5sum: 72f693a8a3f5e704ff6781e1028b3b19 SHA1: ab19a998edcf1071e8cabd9dad30c7210a532ec9 SHA256: a76cd9e8e66003040cfcd726f113d54cf560a6e2e2fb37da372a44cdcb422333 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5894 MD5sum: 99be10e315ef79c92882b1cedffd6299 SHA1: 84bca7e719dbfc53b023e211d35bf684985af2c6 SHA256: 5087a03e138dd2c9e278b564c7bbb468b9e9e67ba0b43cc7c4df8fdc8c5776a1 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-ntrip-caster_0.1-1_all.deb Size: 9348 MD5sum: b359c6d6dee7db8e630b053b0fe938ec SHA1: e0b23adf0ca9af30385776f3fa80b997af659d56 SHA256: ff3bd58abbd18b8cdd94715489c00c65a54783dd0de888d32cad44c7c0ba0a3d Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-nvidia-smi-temperature_0.1-1_all.deb Size: 3452 MD5sum: 64574f67716f83bc0ff37e0334bfc6f6 SHA1: 62f7a6fa93ba062f934354fa595165136ed770ca SHA256: a5ea90823bb5cce5561c2cbef93a1a779f130e692c440964abd4a321c4d3d061 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5444 MD5sum: 2df53e3dd8122c426530a6b0ee476b6f SHA1: b2295f61b21b1733972703789fdf1410fb84a0e0 SHA256: c16a79d11762c8cc552c9055cffa0936e5adfe5c38b3138a2a4d7b67097205db Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-part-db Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 58 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-part-db_0.2-1_all.deb Size: 18348 MD5sum: 5473698d3a8e7bc3675e179b003285a2 SHA1: bff0a95db2483209a758c46cca2701833b538470 SHA256: d9f823e3c8137e35dce4dee032a9d2a874bfd9f74f9d290b13468d27350f8060 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: python3 (>= 3.7), sudo Recommends: podman Filename: all/monitoring-plugins-podman_0.1-1_all.deb Size: 8530 MD5sum: 20c94e7f619f1bf7724c53a77b4cc4f0 SHA1: 8b71e0ea55c00559d7720e9e1a2cd2d7a8724337 SHA256: 8eb19c6d9d64f0da56d879e8812421bc882c5a8fa61830ec22bf2e6454da6013 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3510 MD5sum: 82fbf138a8689d402514bad83cc9e09d SHA1: 4a2451817766527b270e07ec73e3e5470628f641 SHA256: 7b1b9ec42f980f70360c919b77ce5b96e8331af8aa9dc08085ed6d05ef255ba5 Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-printer-php Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 40 Depends: php-cli, php-snmp Filename: all/monitoring-plugins-printer-php_0-0_all.deb Size: 7678 MD5sum: a754edb5b268b2afc0167bc2a52feed2 SHA1: 910a0b41c268ce45a390028933b72433486ac9c7 SHA256: e9613690979f2da463822289a501f4f7796af1f4912c94a29f8b81ffbb9b302b Section: libs Priority: optional Description: Advanced printer check supporting multiple vendors (HP, Kyocera, Ricoh, Nec, Lexmark, NRG) via SNMP. Reads paper tray status, toner/ink levels, hardware part status, internal page counters and alert status. Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4484 MD5sum: cf47c5d07842deb53dec62208c1ffe30 SHA1: 05a0db59bc836333f91d067d1ad248a1b40ca4f1 SHA256: 6feb2a42a0e87adbed0a3f94b104f28d509a3630c46254b496029b7b7336c5af Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3814 MD5sum: 51144b7ec391f687262d52e73207f13d SHA1: 70e00c12780646a51e3b7bf5601781b1dc1e27b6 SHA256: 594ef2bdd5f93850283cfa523aedb09993ab679c05107cd8f86c5d9f4ee9e37c Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: bc, openssh-client Filename: all/monitoring-plugins-remote-load_0.1-1_all.deb Size: 3248 MD5sum: 07bbca9e5111c3602c7b9a3bfa477b28 SHA1: 9b8c12f0d995a152541de637e4308f0bbb091779 SHA256: ab8c54fd660ac2e6a1916f74f3e423688564db0450e1d1e76ee2284d3f7e573e Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 28 Depends: python3 (>= 3.7) Recommends: openssh-client Filename: all/monitoring-plugins-reprise-server_0.1-1_all.deb Size: 8868 MD5sum: 37038075ddd85eac7ad3befef183cd3a SHA1: dfa286e11d0089b832473fa3e34ed2a22aded708 SHA256: ff2a1594763ff726a8d0f48cd727478f3a0c9b3e70173c87d70d2b1af61087d0 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: lm-sensors, bash, jq Filename: all/monitoring-plugins-sensor_0-0_all.deb Size: 4706 MD5sum: 4a6cb1bd980ec7ad2fa627cb8374d1f7 SHA1: 0e02c5716e828270337882d6f09c81e0b0e68219 SHA256: 968c865b51dfa81d004e76d925d17b1f859988af02b6f17cb7e3535b1e6630b0 Section: libs Priority: optional Description: Uses sensors package to read hardware information like fan RPMs or temperatures. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3232 MD5sum: dd13a3a2535213fa43a84ad5b8608f29 SHA1: 0116768ae0a1297971257536cb4a0021ecddcead SHA256: 9beb497d361a811b2bd8092a28ecc071504a90b9118836eee2dc1401ce1e322e Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: snmp Filename: all/monitoring-plugins-snmp-printer-supply_0.2-1_all.deb Size: 4622 MD5sum: ff45f46a5f00cad16caa05c2bd6462bb SHA1: 70b18dfb80cc3742682cb77506e2f4ece6c365f5 SHA256: 78e234baa136ad7e64d30db6238cf0b1d25fccc87e19bb1e517eb1337684e628 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3460 MD5sum: 1b5c6b3b1d8a650b9e3653a0d6b35657 SHA1: b1d0a68b9876e8ef7534df591832826e931d76c7 SHA256: 94fa8c02ee7882b1f908d436bea13a9850eefe4984df50db5945950d44d1dfc5 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49698 MD5sum: cbf462ec46b855311428e20f2f943fa0 SHA1: 101d5c1b977eda8fd0bb4839e3af6e044db72a7f SHA256: c0fc24b9fda6cff0fc0a8b1c757d1d11a48166b21918c3f62eaacdc8142a38b7 Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-stun-turn Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Filename: all/monitoring-plugins-stun-turn_0.1-1_all.deb Size: 9740 MD5sum: 1c4022495e18722a53bd096459055728 SHA1: 55a28c270bb15feb0b2291817d4bf6d03fb5fa0a SHA256: e36cc746da656239600227adafb7e846fb6948631881742a558e88f35398ff2f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd Version: 5.0.0-0 Architecture: all Maintainer: Debian Python Team Installed-Size: 83 Depends: python3 (>= 3.9), python3-nagiosplugin, systemd, default-dbus-system-bus | dbus-system-bus Suggests: python3-gi Filename: all/monitoring-plugins-systemd_5.0.0-0_all.deb Size: 18352 MD5sum: 1f0a0843e9f0f1d8e9a8ead2f41a2d46 SHA1: 35a44c2714b4be054d7148cd47c724e39029f625 SHA256: 28e2aa66ae0fc300262cd60569cc36b48e7c70c39e07cffc50960bb11c91006c Section: net Priority: optional Homepage: https://github.com/Josef-Friedrich/check_systemd Description: systemd plugin for nagios compatible monitoring systems This systemd check for nagios compatible monitoring systems will report a degraded systemd to your monitoring solution. It can also be used to monitor individual systemd services and timers units. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3420 MD5sum: 6cbac6d1954ffb91c30665ae8f59c4a9 SHA1: d7e79fbebf41d990407b3f94a8c8b7a4f5724432 SHA256: 0520603db58b79ec3ddf4c74f6066f0dff907abb3c9cd0607873fa8d2dbcdb08 Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: openssh-client, systemd Filename: all/monitoring-plugins-systemd-sh_0.2-1_all.deb Size: 5000 MD5sum: 84d0701924f411434dc9f262a56bd34a SHA1: 4efffeb26e52eb1978312624c3489fcdaac34e87 SHA256: 76126924df62112cb3636b7be28fd442ab8557dad4ed45ffa9579d499dc61676 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.8), python3-requests Filename: all/monitoring-plugins-tasmota-sensor_0.2.1-1_all.deb Size: 11360 MD5sum: b04b9b3853858b4e8b7617f53d99d4cf SHA1: 923b770548cf476116e8a500cbb411a62f641daf SHA256: 9e833a113c34cfc06c32297be55a0356fa655cd3622bfe609409f8f022674fe4 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: tftp Filename: all/monitoring-plugins-tftp_0-0_all.deb Size: 3302 MD5sum: a319dbdecddbc3320d47d24d6385864d SHA1: 05971ecad0f8167f7f04690ae12fff1d64284852 SHA256: 01313b20cee7e8e342e3b9304ff188306b0cbdfe31eb27af0e640aa607fe791c Section: libs Priority: optional Description: Uses tftp to connect to a tftpd and checks if a file with a known name can be downloaded. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3446 MD5sum: 0ce40f86e5f6210494a4dcd1c9c81427 SHA1: 12368dcfa31b56f72130e23fd1f4e2c3a68d6c6d SHA256: 2068237b5b9ee0dea9f82a856e00834452fd5299542324bfef313e1e79ff9c86 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: curl | wget Filename: all/monitoring-plugins-tor-proxy_0.2-1_all.deb Size: 5744 MD5sum: 6c0596e73707e196d96fc9a41f41986c SHA1: 96f92f7046613a160d73e6d5b1910f7195779839 SHA256: 8e725586382bfdb87f2609c992500fd3157d9ba540414b5637eae569662bed1b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3450 MD5sum: 56dbdb43b86f4c59f036f66b99b66d10 SHA1: 987fef5e830c7fbc80e0b38aca85a8582b60bb0a SHA256: ebb58f15fccb811bf4609489283e3dbd22982cdb429f1511084f309680070814 Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3830 MD5sum: 47462fc4411f20679a894d7148982a0e SHA1: 61349d0c0f21cfab493a0a140f8bf8799869da91 SHA256: 03aced9c8aa3fc27097c251f71a7e7874930c899b6ea60f75beef9f029dd8e60 Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 4058 MD5sum: 1c44030d189463478182a31e9134a72d SHA1: 408d6fcb5339ba9a8f1aaa57445a414677482dcf SHA256: 50c4ef097335e6e33ea2c76706a1a35d14ad1c743a93c8735d944378fc7cde5b Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 52 Depends: snmp, gawk | mawk Recommends: python3 Filename: all/monitoring-plugins-zyxel-hw-monitor_0.1-1_all.deb Size: 7998 MD5sum: f286b2e0acdac7e8d5e7f0a24b3c9b68 SHA1: 4952cf5a936a3b7b58526c2408aad4372f0d17a2 SHA256: c45cc9404b7f972c353c684cb86d0e0145d43134692d995d85028dac77feb159 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: purge-postfix-mails Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Depends: jq (>= 1.6), postfix (>= 3.1) Filename: all/purge-postfix-mails_0.3-1_all.deb Size: 4330 MD5sum: 5df1399921c47d9b254800863b3d6fe3 SHA1: 92c55b1c938c828eba7abb83dfb267f6ff29ca7f SHA256: 160b0ba4f3609518a37302cd75f59722c0d762fc9332c5c41ac82912dccf21e3 Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7102 MD5sum: 7c897880fa623a6316d2c1b307ee557e SHA1: cc8954c026670ef51bfd940c6db5d9bdffee2107 SHA256: a5bc5e1054d31b0f3ddbba5c1d97cf7168741ab1fc66117e09f2576c7d48d6cd Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vm-boot-order-2 Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Filename: all/vm-boot-order-2_0.1-1_all.deb Size: 10206 MD5sum: 2886fcde8de6383ba58298768572e276 SHA1: a4fc0b2aea4cf9d60137387ad1de3046bda34a0b SHA256: 962f6a8b0a41b7a16b224c33d1d55b934fa30c2c4a2da92d5ef66ad4ca435c93 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.